Homepage
The bidirectional RCJ32 flush-mounted receiver is designed for switching low- or mains- voltage devices with a potential-free changeover contact. Up to 32 transmitters can be taught in.

In addition, a button input is available for local wired operation.

Programming is simply done on the device by pressing a button or via radio using remote programming (POTA).

In addition to the ON/OFF function, the operating modes LOGIC, DEADMAN and TIMER (adjustable from 1 second to 30 hours) can be used.

The flat design facilitates installation in flush-mounted sockets, behind switches or behind sockets.


RCJ32EN5001A01-K
Technical specifications
Coding Easywave neo
Up to 32 transmitters can be programmed
POTA
Frequency 868,30 MHz
Channels 1
Power supply 230 V AC, 50 Hz
Power consumption 0,3 W standby
0,8 W relay switched (without load)
Operating modes ON/OFF (2-button operation)
ON/OFF (1-button operation)
TIMER (adjustable)
LOGIC
DEAD MAN
Input 1 external button
Output 1 potential-free relay contact (changeover)
Maximum contact load resistive load:
Normally open: 10A / 2300VA
Normally closed: 6A / 1380VA

inductive load:
Normally open: 3A / 690VA
Normally closed: 2A / 460VA
Operating temperature -20 °C to +45 °C
Dimensions 43 x 42 x 17,5 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Models
Product numbers Description
RCJ32EN5001A01-K Flush-mounted receiver, Easywave neo, 230V, 1x changeover, potential-free, button input
Wiring diagram